Cressall

Load Banks

AC6 dual & single voltage portable load banks

AC6 Dual Voltage for testing portable generators up to 6kW, 110V and 230V AC

Capacity

0-6kW in 333W switched steps of 333W. 666W, 3 x 1kW and 1 x 2kW, switched in any combination.

Test voltages

Two switch-selected voltage ranges:
220-240V, 1 phase 50/60Hz
110-120V, 1 phase 50/60Hz

Controls

Integral control panel with hinged weatherproof lid with:
1 – 48mm DIN voltmeter 0-300V linear
1 – 48mm DIN ammeter 0-100A linear
1 – 48mm DIN frequency meter 45-65Hz
1 – 3 position rotary switch 110V – OFF – 230V
2 – single pole MCB’s for protection
1 – meter fuse
AC^ Dual voltage load bank

Resistor Elements

Mica card elements wound with high-grade nickel-chrome stainless steel resistance tape with 600V primary insulation.

Cooling

Fan cooled with a single 170mm fan powered from the test load itself. The fan is mounted on one side of the load bank and blows horizontally through mesh screens on each side.

Input cables and connectors

Two 1.5m flexible input cables complete with colour coded input connectors to IEC-60309-2 are fitted as standard.

Case

All aluminium, finished in red powder coat, with instructions and warning labels. The load bank is fitted with a detachable cover with carrying handle and built-in cable stowage box.
Dimensions: 495 x 220 x 550mm high
Weight: 12kg complete

AC6 Single Voltage for testing portable generators 6kW, 230V AC

AC6 single load bank

Capacity

0-6kW in 333W switched steps of 333W. 666W, 3 x 1kW and 1 x 2kW, switched in any combination.

Test voltages

220 – 240V, 1 phase 50/60Hz

Controls

Integral control panel with hinged weatherproof lid with:
1 – 48mm DIN voltmeter 0-300V linear
1 – 48mm DIN ammeter 0-100A linear
1 – 48mm DIN frequency meter 45-65Hz
1 – switching ON – OFF
1 – two pole MCB’s for protection
6 – on/off toggle switches
1 – meter fuse

Resistor Elements

Mica card elements wound with high-grade nickel-chrome stainless steel resistance tape with 600V primary insulation.

Cooling

Fan cooled with a single 170mm fan powered from the test load itself. The fan is mounted on one side of the load bank and blows horizontally through mesh screens on each side.

Input cables and connectors

One 1.5m flexible input cable complete with colour coded input connector to IEC-60309-2 is fitted as standard.

Case

All aluminium, finished in red powder coat, with instructions and warning labels. The load bank is fitted with a hinged cover with carrying handle and built-in cable stowage box.
Dimensions: 495 x 220 x 415mm high
Weight: 10kg complete

Download AC6 data sheet