Industry the planet’s close friend

INDUSTRY: THE PLANET’S CLOSEST FRIEND OR MOST SWORN ENEMY?

industrialpollution and global warming

REALISING THE GOVERNMENT’S BUILD BACK BETTER PLAN

Britain — the birthplace of the Industrial Revolution, the golden age of innovation that transformed society. However, the fossil fuels that powered the revolution have left a detrimental mark on our world, which we are fighting to change with Net Zero. Is the industry that triggered the climate crisis in the first place part of its solution?

The Industrial Revolution transformed the world, igniting technological development that continues to this day. But it has also had disastrous consequences for the planet, with carbon emissions from fossil fuel use triggering the climate crisis. 

However, the necessity of industry is well recognised. The UK’s manufacturing and refining sectors contribute £180 billion to the economy and provide millions of jobs, both directly and indirectly across the entire manufacturing value chain, presenting a dilemma — is industry a help or a hindrance to the planet’s future?

INDUSTRY’S CARBON CONTRIBUTIONS

The Industrial Revolution triggered a rise in the Earth’s core temperature that is yet to stabilise. Since 2018, the Intergovernmental Panel on Climate Change (IPCC) has been warning us that a temperature increase of more than 1.5 degrees Celsius (°C) above pre-industrial levels will result in irreparable damage from extreme weather, failed harvests and species extinction.

The Government’s Net Zero strategy provides a roadmap to successfully combatting the climate crisis. Published in October 2021, Build Back Better gives details on how the UK will achieve Net Zero carbon emissions by 2050. Industry is at the heart of this challenge, both as a carbon contributor and emission eliminator.

Industry is a major source of carbon emissions, producing 15 per cent of the UK’s total. The Government estimates that emissions associated with industry need to drop by as much as 96 per cent by 2050 to achieve Net Zero status — demonstrating the magnitude of its current contribution to the climate crisis.

RESOLVING INDUSTRY’S PROBLEM

Industry’s damage to the planet has incrementally decreased over the last couple of decades. However, to keep momentum, further innovation is necessary to reach Net Zero in this huge carbon-emitting sector, both directly and indirectly. 

According to the International Energy Agency (IEA), industry’s indirect carbon contribution through its colossal energy consumption accounts for 40 per cent of the globe’s total. The move to a decarbonised renewable power supply will help eliminate this. 

However, the situation is more severe with direct CO2 industrial emissions. Since some crucial processes don’t currently have a carbon-free alternative, emission elimination is not always possible — reduction is as far as it can go. CCS is key to aligning industry with Net Zero, ensuring essential carbon-emitting processes continue without the climate consequences.

INDUSTRY’S INNOVATIVE INPUT

Despite being responsible for a large proportion of emissions and acting as a catalyst for the birth of the climate crisis, industry is also the planet’s saving grace. 

The Government’s Net Zero strategy is striving for a fully decarbonised, reliable power supply that integrates both renewable sources, like solar and wind, and dispatchable net-zero sources like natural gas with carbon capture and storage (CCS). In transportation, the goal is to ensure all cars are zero-emission capable by 2035, end the sale of petrol and diesel heavy goods vehicles (HGVs) by 2040 and achieve a net-zero rail network by 2050. 

Reaching these challenging targets involves key manufacturers developing innovative products and services to enable Net Zero. For example, at Cressall Resistors, we manufacture a range of resistors crucial to reaching Net Zero. For the automotive market, the EV2 dynamic braking resistor facilitates regenerative braking in electric vehicles, helping to increase vehicle range and improve the viability of a fully electric national fleet at an unrivalled weight and size to power ratio.

When it comes to decarbonising the nation’s power supply, pre-insertion resistors are used to prevent overvoltages caused by renewable energy’s variable input, while load banks safeguard all power systems by proving their power generation capability. Resistors are necessary to protect every electrical system and make Net Zero a realistic goal.

The Industrial Revolution is by and large to blame for the catastrophic levels of CO2 that have been emitted into our atmosphere since the eighteenth century. But it’s also a crucial part of the solution. Not only through eliminating its own carbon footprint, but also by developing the components to decarbonise other sectors. 

With the full Net Zero strategy revealed, now’s the time for industry to step up and take responsibility for preventing more damage to the planet and shift its position from the planet’s most sworn enemy to its closest friend. 

CRE475

COP 26

COP26 round up: the path to coal-free

Clean energy future and resistors role

INDUSTRY’S NEXT STEPS TO A CLEAN ENERGY FUTUREI

The COVID-19 pandemic has shown the world how quickly global threats can take over, making this years’ Conference of the Parties (COP), COP26, the most imperative yet. As the world’s leaders debated how to limit climate change, phasing out coal power became a vital discussion point. Here Simone Bruckner, managing director Cressall, explores the energy goals made at COP26 and the technology that can help achieve them.

From the UK going coal-free for two months in 2020 to Venice’s canals clearing of pollution, restrictions during the COVID-19 pandemic had several positive effects on the environment. While these consequences were cause for short-term celebration, the pandemic highlighted the significant impact normal lifestyles and industrial operations have on our planet. 

In addition, despite temporary reductions in greenhouse gas emissions during the pandemic, the United Nations (UN) United in Science 2021 report found that their concentration in the atmosphere continues to rise. Alarmingly, the report also concluded that there’s a 40 per cent chance that average temperatures in one of the next five years will be 1.5 degrees Celsius warmer than pre-industrial times.

IMPORTANT TARGETS

It’s clear that, while much of the world’s operations paused during the pandemic, climate change continued. This placed particular importance on COP26, with some viewing it as the last chance to save the planet from climate disaster. The resulting COP26 agreement calls for countries to accelerate the phasing out of coal and subsidies for fossil fuels. This is a world first, as previous UN climate agreements have not specifically mentioned fossil fuels. 

In pledges made at COP26, more than 40 countries committed to transitioning away from coal. In order to phase out coal power, countries must increase the proportion of clean energy in their networks. This will not only require scaling up of renewable projects, but also incorporating technology that increases their efficiency.

RELYING ON RENEWABLES

For instance, solar tracking can increase the efficiency of solar panels by using motorised systems to move the panels so that they are always in direct alignment with the sun. This increases efficiency by overcoming a common issue seen with solar panels, where their power generation peaks at midday. 

Incorporating a solar tracking system can increase average solar panel power output by 35 per cent, and high efficiency can be further ensured by incorporating a dynamic braking resistor. In the motorised system, a dynamic braking resistor can be installed to dissipate the excess voltage of a decelerating motor. This makes sure that the motor doesn’t overshoot, which would cause the panel to land in a sub-optimal position.

Another renewable energy system that can benefit from additional technology is wind turbines. The majority of wind turbines use a doubly fed induction generator (DFIG), which enables them to operate at variable speeds. However, in exceptionally high winds, the rotor speed of a DFIG can exceed the maximum operating range of the system. This in turn can lead to high voltages that destroy elements of the system.

To avoid this issue and ensure high efficiency of the wind turbine system, a crowbar resistor can be fitted to the DFIG. Connected to the rotor windings of a DFIG, a crowbar resistor can prevent damage to the generator by disconnecting the converter when the rotor speed reaches its limit. 

RESISTORS TO THE RESCUE

With over 100 years’ experience in electrical engineering, Cressall is a trusted supplier of resistors to the renewable energy industry. For instance, our crowbar resistors for wind turbines can withstand high currents while remaining operational. In addition, our braking resistors for solar panels have no wearing components, so last as long as the panels themselves.

A commitment to phasing out coal power was a key outcome of COP26, and countries must increase their reliance on renewable energy if society is to bid farewell to fossil fuels. However, incorporating more clean energy into the network requires not only scaling up installation projects, but also taking advantage of advanced technology that can increase the efficiency of power generation. 

CRE476

Zero carbon transportation

ZERO CARBON TRANSPORTATION

HOW CAN AUTOMAKERS SUPPORT TRANSPORT’S DECARBONISATION?

In July 2021, the UK government unveiled its plan to decarbonise the entire domestic transport system to align with the net zero by 2050 target. All forms of domestic transport will be decarbonised on land, air and sea.

The electrification of the automotive market is a necessary step to reduce greenhouse gas emissions and ward off climate change’s consequences. Every automaker is in support of the rollout, with more affordable models being released by the day to encourage consumers to make the electric shift. At the same time, governments are enforcing change through legislation that bans the sale of new fossil fuelled vehicles from as early as 2025.

The Decarbonising transport: a better greener Britain report outlines how the government intends to achieve transport decarbonisation. While some of the report repeats previous pledges, it announces several new targets.

HOW HAVE THINGS CHANGED?

Since announcing its nation-wide net zero emissions by 2050 target back in 2019, it’s been common knowledge that the government wants all transport to decarbonise in the next few decades. One key initiative has been ending the sale of new fossil-fuelled cars and vans, which has been brought forward to 2030 — ten years ahead of initial plans.

In addition to bringing forward the ban on petrol and diesel cars and vans, the latest report also announces a ban on petrol and diesel heavy goods vehicles (HGVs) in 2040. This is an important step in decarbonising road transport since HGVs are some of the biggest carbon dioxide emitters, accounting for 17 per cent of road transport’s total emissions.

Although similar targets have been set for other transportation sectors, automotive is arguably in need of the greatest overhaul. The latest figures show that in 2019, the majority of greenhouse gas (GHG) emissions were from road transport. Therefore, we must take decarbonising this subsector as a top priority.

Despite significant progress, more needs to be done to create an electrified transport fleet. The electric vehicle (EV) market is growing at an exponential rate. According to data collected by the Department for Transport, Q1 of 2021 saw 73 per cent more battery electric vehicle (BEV) registrations than Q1 of 2020. With uptake ever increasing, automakers must address barriers to widespread adoption.

WHAT CHALLENGES DO WE FACE?

An extensive charging infrastructure across the UK will be needed to enable road transport’s decarbonisation, to meet consumer demand and to make EVs a viable option in all parts of the country. 

According to Zap Map, as of 21 July 2021, just under a third of all charging points were in Greater London, with more sparsely populated areas such as Northern Ireland accounting for just 1.3 per cent of all charging points. It is vital to tackle this disparity and ensure access to charging points is the same regardless of location to encourage EV uptake in rural communities.

HOW CAN TRANSPORT MANUFACTURERS SUPPORT THIS PLAN?

To support these goals, ensure compliance with fossil fuel bans and overcome these challenges, manufacturers must design vehicles and their components to facilitate decarbonised transport uptake.

EV2 modular resistor for electric vehicles

Cressall’s EV2 resistor is designed with the challenges of manufacturing EVs in mind. The EV2 is a dynamic braking resistor (DBR), which is an essential component of an EV. A DBR safeguards an EV’s power system by removing excess energy generated while braking. If the battery isn’t fully charged, this energy would be used to recharge the battery. However, when the battery is full or there is a failure, it’s vital to remove this excess energy from the system to prevent damage. A DBR dissipates it as heat, which can be used to warm the vehicle’s cabin or preheat the batteries too in order to achieve maximum efficiency.

The EV2’s flexible design makes it suited to every EV application. Its modular design means that up to five units can be combined in a single assembly to achieve a power rating between one kilowatt (kW) and 125 kW. Its extensive design range works up to 1500 Volts terminal to terminal and a resistance of up to 20 ohms (Ω) per single module. This flexibility means the resistor can be adapted to suit any automotive application — from small cars to large HGVs.

The government’s plan to decarbonise all domestic transport by 2050 will slash the sector’s contribution to total carbon emissions. With manufacturers’ support, this goal is achievable, accelerating the nation’s progress to net zero, reducing pollution and alleviating the damaging effects of climate change.

CR472

Offshore wind

ADVANCING OFFSHORE WIND

HOW CAN WE EXPAND OFFSHORE WIND TO REACH 2030’S 40 GW TARGET?

The UK’s history is enriched with maritime activity. Surrounded by water from John o’ Groats to Lands’ End, the surrounding waters have played a pivotal role in trade, travel, and most recently, electricity production. Achieving the Government’s target of generating 40 gigawatts (GW) of offshore wind power every year by 2030 will require continued investment and development in power equipment.

Offshore wind power plays to the nation’s geographical strengths while also providing a clean energy source to fuel the country’s path to net zero. The North Sea’s high quality wind resources and relatively shallow water make it an ideal location for offshore wind farms. According to the International Renewable Energy Agency (IRENA), around 90 per cent of global offshore wind capacity is located in the North Sea, which is why the UK is already a world leader in this renewable power source.

However, to reach the Government’s 2030 production goal, energy suppliers must make advancements in wind turbine technology, while simultaneously considering how their generated power will be safely transferred to the grid.

IMPROVED TURBINE TECHNOLOGY

Turbines capable of producing more power per rotation are essential for the development of efficient offshore wind farms. One way of improving turbine efficiency is to increase the blade length.

An increased blade length means that stronger forces will act on the turbine, so the blade material needs to be appropriately chosen. To achieve an adequate stiffness-to-weight ratio to avoid deflection, carbon fibre or fibreglass blades are typically favoured. However, there is an expanding market for hybrid reinforcements, which combine the two materials together for optimum sturdiness.

Improvements in wind turbine technologies have already triggered a move into deeper waters to use sites with better wind resources. Static wind turbines are still restricted to waters at a maximum depth of 60 metres, so to upscale the UK’s wind power output, floating wind turbines will be essential.

MORE SUITABLE SITES

Once all viable sites within 60 metres of shore have been constructed, floating wind projects will become vital to offshore’s growth. Floating offshore wind farms, which can be located up to 80 kilometres (km) from land, could play a key role in the long-term decarbonisation of the power sector.


Floating wind turbines sit on a steel and concrete floating system instead of a fixed base, meaning they can be placed in a larger number of sites up to 200 metres deep. They can also be towed, allowing them to be relocated without much additional cost. This broadens the potential output that offshore wind could provide and brings it one step closer to the 40 GW target.

SECURED POWER SUPPLY

Like all renewable energy, offshore wind can be unpredictable and inconsistent, which can make grid connection challenging. In periods of high wind, large inrush currents occur, which can lead to overvoltages on the grid and subsequent equipment malfunctioning.

It’s important to prepare for these inevitable inrush currents by integrating technologies such as pre-insertion resistors (PIRs). Already in use across many of the UK’s windfarms, Cressall’s PIRs have a high thermal mass, which allows them to absorb excess energy produced by the inrush current and safely dissipate it as heat. This prevents damage to the grid and improves the reliability of offshore wind’s power supply.

Offshore wind holds great potential in the shift towards renewable energy and could be the key to decarbonising electricity generation. However, we must continue to advance critical power protection technologies to prevent any obstacles in its upscaling and to enable this powerful resource to flourish.

CR456